LightTrader.com | Professional Lighting for Lighting Professionals

Search

Enter Keyword(s)

in 

Sign Up Sign up for Lighttrader news and special offers

We Accept Visa, Mastercard, American Express and Discover

Like us on FacebookLike Us on Facebook

ETC Source Four Mini, 50°, Blk w/ Lamp, CC, GF, PH & Plug

  • $340.00
Out of Stock

Item Number: ETC7063A1003

Fixtures DO NOT ship with:

  • Connector
  • Lamp
  • Patter Holder
  • Iris
  • Donut

Big Source Four® attitude, small size

Good things come in small packages. The Source Four Mini™ is everything you expect from the Source Four® brand - ease of use, superior optics, crystal-clear image projection and a bright, even field - but packaged in a tiny fixture that's just one-third the size of a traditional Source Four. A mere nine inches long, and available in both tungsten and LED, the Source Four Mini can go anywhere: museums, retail outlets, restaurants, light labs, children's theaters, and other small scale installations where size matters.

The Source Four Mini is available in four field angles: 19°, 26°, 36° and 50°, with a 2.5-inch diameter lens. It comes in a portable version with a miniature C-clamp, a canopy-mount design with an integral transformer, or a track-mounted design. There is also a low-voltage (12V) tungsten version. All Source Four Mini models include an E-sized pattern holder and a gel media frame, with a range of additional accessories.

Features for all Source Four Mini models

 

  • Available in 19°, 26°, 36° and 50° field angles
  • 9" long, 2.5" diameter
  • Available in 50W tungsten/halogen MR16 lamp (5,000-hour life), 12V tungsten/halogen lamp, or 12W LED (35,000-hour life)
  • Portable, canopy-mount and track-mount versions
  • E-size pattern holder
  • Gel media frame
  • Rotating barrel ± 175°
  • Three-plane stainless-steel shutter blade assembly
  • Tool-free lamp replacement
  • Insulated rear handle
  • Rugged die-cast aluminum construction
  • Black, white, silver or custom colors available

Canopy-mount features

  • 4.5 x 1.5" color-matched canopy
  • Canopy-mounting hardware for 4" ceiling junction box included
  • 12V transformer or LED driver in canopy for hardwired 120V or 230/240V input

Portable features

  • Yoke-mounted 12V transformer or LED driver in color-matched case
  • Miniature C-clamp included
  • 3' power cable and choice of Edison, UK or EU plug

Track-mount features

  • ETL-Listed and compatible with EUTRAC-brand track
  • Factory-installed, integral 12V transformer or LED driver in color-matched (black or white) adapter

MINIATURE ELLIPSOIDAL FRAMING PROJECTOR SPOTLIGHTS

  • General
    • The instrument shall be a Source Four Mini ellipsoidal framing projector spotlight as manufactured by Electronic Theatre Controls, Inc., or approved equal.
    • The unit shall be dimmable using forward- or reverse-phase dimming technology
  • Physical
    • The unit shall be constructed of die cast aluminum, free of burrs and pits, finished in black, high temperature epoxy paint.

      • Fixtures shall be available in white and custom colors as specified.
      • Accessories and painted parts shall be color-matched to the specified color.
      • Non-painted parts shall be available in matching or complimentary colors.
      • Exceptions to color-matching shall be noted prior to custom paint approval.

    • Tools shall not be required for lamp changes.

    • The framing spotlight:

      • Shall have interchangeable lens tubes for different field angles as specified
      • Shall have stainless steel shutters of at least A301 grade material
      • Shutter assembly shall allow for +/-175-degree rotation of the framed area or pattern
      • Shall have a slot with a sliding, tool-locking cover for patterns
      • Shall allow for use of E-sized patterns
      • Shall include a pattern holder
      • Shall have an integral die cast media frame holder with two slots
      • Shall have a top mounted, quick release media frame retainer
      • Shall utilize a 2 ¾” (70mm) gel frame
      • Shall have a thermally-insulated knobs and shutter handles
      • Shall have a thermally-insulated rear handle
      • Shall have integral cable clamp(s) for power leads
      • Shall have a steel yoke allowing at least 350=degree tilt of the fixture within the yoke
      • Shall have tool-free tilt and beam adjustment while allowing for tool-tightening at all movement points.

    • The fixture shall be offered with four different installation methods:

      • Portable version shall include:

        • Yoke mounted, 120 –volt primary, 12-volt secondary dimmable transformer with plastic case
        • Size-matched, extruded aluminum, black anodized C-clamp for use on pipe ranging from 3/8” to 1”
        • Three-foot power cable with 2-prong Edison connector
        • Tested to UL/cUL153 standard and listed with a 3rd-party laboratory

      • Install Canopy version shall include:

        • Color matched, power-coat painted, formed steel canopy mount with mounting hardware
        • Integral 120-volt primary, 12-volt secondary dimmable transformer factory-prewired and installed in the canopy.
        • The transformer shall fit entirely within the canopy, requiring no additional space in the junction box or ceiling cavity
        • Built-in rotation stop at 358-degrees to prevent cable twisting or damage.
        • Tested to UL/cUL1598 standard and so labeled.

      • Track Mount version shall include:

        • Color –matched plastic track adapter for use with EUTRAC-brand 2-circuit track
        • Integral 120-v primary, 12-volt secondary dimmable transformer factory prewired and installed into track adapter
        • Tested to UL/cUL1574 standard and so labeled.

      • Low Voltage version shall include:

        • Three-foot power cable with bare ends
        • Tested to UL/cUL 2108 standard and so labeled.
  • Optical
    • The spotlight shall have high-contrast aspheric lens(es), with an anti-reflective coating to increase transmission, with:

      • Adjustable hard and soft beam edges
      • Crisp pattern imaging without significant halation
      • Sharp shutter cuts without halation

    • Fixture shall have a three plane shutter design to provide adjustable framing angles with ability to overlap cuts

      • Fixture design shall have built-in heat dissipation to prevent shutter warping and burnout in normal use

    • Fixture shall allow for interchangeable lenses with variable beam angles

      • There shall be at least 19, 26, 36, 50 degree field angles available as specified

  • Lamp
    • The fixture shall utilize a MR16 50W lamp with a GU5.3 base type

    • Lamp shall be provided with each fixture

    • Lamp shall have a 35 degree beam spread for optimal performance

    • The lamp shall have tool-less replacement without disturbing the focus of the fixture

Product Ratings and Reviews

Sign in to add a review.